U.S. Solid Dual-Purpose Electric/Manual Coil Winding ...

This machine works very well and is much cheaper than just about any alternative (including many diy ones). I originally ordered an NZ-1 winder from a different seller. It had a different brand name and the faceplate was in Chinese as opposed to English. One of the gears is plastic and when it arrived the plastic gear was broken in half. I returned it and decided to try the one offered by this seller instead. This one still has a plastic gear, but it arrived intact and it is a different type of plastic that I am pretty confident will not break.

I used it to wind a guitar pickup and it worked great. I stuck a strong magnet on the end of the spindle and it held the pickup in place via the center pole pieces.

The counter works great and seems to be accurate. If you turn it in reverse, the counter reverses as well, so should you need to do some unwinding if you have a problem, the count will stay accurate.

It is mentioned that you can hook a motor up to the winder, but does not give good information on how to do this or what kind of motor to use. I found a write-up that someone who used this winder to make Helmholtz coils produced. In their write-up, they mentioned that it works well with an old sewing machine motor and pedal (1.0 AMPS HOME SEWING MACHINE MOTOR & PEDAL SINGER HA1 15 66 99). These are available for very cheap on ebay. I ordered one but have yet to receive it and see how well it works. Should you hook it up to a sewing machine motor, you need to be careful to not go too fast, as the motor will allow for higher RPMs than the winder is rated for.

The only reason I give it four stars instead of five is because of the poorly written instructions/documentation.

**Edit**
I have used this multiple times now for winding pickups. It still works great. I did get the sewing machine motor hooked up to it and mounted it all to a piece of 2x6 and have not had any major issues other than having to keep my eye on the speed. I also occasionally need to give the motor a break to keep it from getting too warm.

I no longer use the magnet to hold the pickup in place. Instead, I bolted a piece of board vertically to the end of the shaft. Before winding a pickup, I apply carpet tape to the board and stick the pickup bobbin directly to the carpet tape. I got this idea from reading the manual for a professional pickup winder to see how they held their bobbins.

I have added a couple of photos to show my setup.

Optima are exported all over the world and different industries with quality first. Our belief is to provide our customers with more and better high value-added products. Let's create a better future together.

We have more than 30 years of experience providing automated coil solutions that businesses need as part of their production line. Our winding machines are tried, tested and proven to deliver the results that businesses require. We started producing winding machines in . Since then the machines we have sold have won numerous awards. For instance, our Needle Winder won the Taiwan Excellence Award from the Taiwan Government in . We are committed to constantly taking steps to improve our products so that we can guarantee businesses can order the best winding machines for their production line. 

At Teeming Machinery we offer three main types of winding machines with variations that you can choose for your business. The right type will depend on the type of material that you are winding as well as output and production requirements. 

Contact us to discuss your requirements of rewinding machine wire. Our experienced sales team can help you identify the options that best suit your needs.

We have auto winding machines with between 4 and 32 spindles depending on your business size and requirements. These are suitable for different types of small bobbins so you can easily customize the jig. The machine can also be used to perform precise layer winding. You can also take advantage of automatic solutions to speed up your production process, increase your capacity and reduce the number of employees required. These systems also boast low levels of required maintenance, ensuring that they will continue to function without downtime. 

Our motor winding machines provide significant benefits including accurate coil wire positioning. This ensures that the machine operates at a high speed and provides the rapid standards of production you require. You can also use high speed needle winding capabilities to maximize your efficiency standards. Similar to our auto winding machines, the jig can be adjusted and changed easily when required. 

We also stock 4 single winding machines which will be ideal for smaller businesses and companies with a lower number of production requirements. These systems are easy to control and you can quickly set up the program that you need. As such, you will have no problem ensuring that your production process is firing on all cylinders. 

We hope this provides all the information you need about the winding machines and the different types that we offer. If you need more details or you don&#;t know which type of machine is right for your company, please do not hesitate to contact us today. We will be happy to assist you further and ensure that you get the best machine to match your business requirements. 

For more wire granulatorsinformation, please contact us. We will provide professional answers.