What is a good brand for screwdrivers?

theoldwizard1 said:

Still looking for a moderately priced set of gunsmithing screwdriver or 1/4" hex bit. For use on small engine carburetor s.

If you are looking for more details, kindly visit Probuilt.

Click to expand...

Take a look at Champan. Not sure if you would consider them moderately priced? They have a variety of kits that meet gun smithing and small fastener needs.

It is personalized. My first Screw drivers where Acetyl handle Craftsman circa . It was all I knew for a long time. I only use them now if I have to. They still make them the same way and people still buy them. They are a home owner grade in my opinion.
I have some Top Tul with with striking cap, hex bolster, magnetic and they have great qulity tips. Well worth the money You will all laugh at this but I also bought a set of Cal Hawk Demo screw drivers for like $16 for 8 in the set. I keep them in my travel bag and I beat the crap out of them. they have been great for the applications and cost. And If I loose or break one I won't be mad at myself.

Also, HF has what they call a Pittsburgh Professional set that a lot of people on here have been very pleasd with. I use the number 2 a lot on semi stripped or questionable philips. Has very good quality magnetic tips. Well worth the $9.99 for the set. I have purchased 3 of those sets to spread out between my travel bag, basement shop and back yard shed. My only disapointment is it does not come with a #3 philips. Again if I loose one or break one I will not be upset at all.

If you need JIS Vessel seems to be the go to. I hardly need that and the same with Pozi drive. When I have a need I have a lot of bit drivers. I use Torx more than either of those combined. For Torx I really like my Carlyle set. My only gripe is that the markings easily wore off. Nice comfortable tri-lobe where you can get good grip and torque.

Depends what you need them for, as about 5 folks have already said. I did not see the PF video but have seen a lot of his work. For what he has to work with and a self funding budget he puts in a ton of work and does a great job. Like with any testing, often times the test identifies flaws that you can address in a second round.

Take a look at Champan. Not sure if you would consider them moderately priced? They have a variety of kits that meet gun smithing and small fastener needs.It is personalized. My first Screw drivers where Acetyl handle Craftsman circa . It was all I knew for a long time. I only use them now if I have to. They still make them the same way and people still buy them. They are a home owner grade in my opinion.I have some Top Tul with with striking cap, hex bolster, magnetic and they have great qulity tips. Well worth the money You will all laugh at this but I also bought a set of Cal Hawk Demo screw drivers for like $16 for 8 in the set. I keep them in my travel bag and I beat the crap out of them. they have been great for the applications and cost. And If I loose or break one I won't be mad at myself.Also, HF has what they call a Pittsburgh Professional set that a lot of people on here have been very pleasd with. I use the number 2 a lot on semi stripped or questionable philips. Has very good quality magnetic tips. Well worth the $9.99 for the set. I have purchased 3 of those sets to spread out between my travel bag, basement shop and back yard shed. My only disapointment is it does not come with a #3 philips. Again if I loose one or break one I will not be upset at all.If you need JIS Vessel seems to be the go to. I hardly need that and the same with Pozi drive. When I have a need I have a lot of bit drivers. I use Torx more than either of those combined. For Torx I really like my Carlyle set. My only gripe is that the markings easily wore off. Nice comfortable tri-lobe where you can get good grip and torque.Depends what you need them for, as about 5 folks have already said. I did not see the PF video but have seen a lot of his work. For what he has to work with and a self funding budget he puts in a ton of work and does a great job. Like with any testing, often times the test identifies flaws that you can address in a second round.

For more information, please visit screwdriver manufacturer.

A screwdriver is one of the important tools for different sectors, especially in the electrical field. This product includes 3 parts and every part is different from others. The main purpose of the screwdriver is, it removes the screw or tightens it as per your need. In the market, people will find different types of screwdrivers at different prices. You have to choose the best type of screwdriver as per your need. Mostly electricians, service providers, and technicians mainly use such types of screwdrivers. As you will find in the market different types of screwdrivers, you will also get different brands. Now, you have to choose the best type of brand as per your need. Here, in this article, you will find the best screwdriver brand details. you can check and select any brand as per your need. 

If you want to know details about the top 10 best screwdriver brands then you need to read the following details and gather some knowledge. This will help any company or individual seller or buyer to choose the best screwdriver manufacturing company. 

The company is the world’s best hammer manufacturer supplier. We are your one-stop shop for all needs. Our staff are highly-specialized and will help you find the product you need.