Metal Lath Products | 2014-01-02

Expanded diamond-mesh metal lath products have long been a key component of stucco-clad building exteriors, which consist of plaster applied over wood or gypsum sheathing. Though expanded metal lath may appear to be a rather basic, uncomplicated building material, the expanded metal lath product specified, and the way it is installed, has a huge impact on the long-term stability of the plaster it supports. Since not all metal lath products are created equally in terms of quality, it is crucial to research the performance attributes of each product being considered before making a final decision.

Wusheng Hardware supply professional and honest service.

Fortunately, there are several building codes and industry standards available today to steer specifiers toward a high-performance expanded metal lath product and installers toward proper installation steps. In this article, we will cover industry guidelines for selecting metal lath products that meet the requirements of current international building codes. In addition, we will share common metal lath installation errors and counter them with the proper installation techniques. Adherence to the guidelines in each of these disciplines can help building and design professionals produce stable, long-lasting exterior wall assemblies.

Specifying Quality Products

Before specifying an expanded metal lath product, it is important to verify that it has first passed testing conducted by an independent third party for compliance with the International Building Code, the International Residential Code and the industry standards they reference. The industry standards most widely used by the IBC and IRC to gauge the product performance needed for code compliance are ASTM C847, Standard Specification for Metal Lath, and ASTM C, Standard Specification for Installation of Lathing and Furring to Receive Interior and Exterior Portland Cement-Based Plaster.

Building Code Requirements

The IBC and IRC call upon ASTM C847 to define the expanded metal lath&#;s physical properties required for code compliance. This standard lists minimum lengths, widths, lath thicknesses and weights for products, as well as allowable tolerances. In order to meet these criteria, metal lath manufacturers have to pay close attention to a variety of details in their product design, including: the base thickness of the galvanized steel coil, cutter configurations and the pull force applied to the galvanized steel coil while being stretched.

ASTM C847 calls for metal lath to be manufactured from cold-rolled carbon steel sheets, per ASTM A653, Standard Specification for Steel Sheet, Zinc-Coated (Galvanized) or Zinc-Iron Alloy-Coated (Galvannealed) by the Hot-Dip Process. In addition, ASTM A653 requires hot-dipped galvanized lath to have a coating of at least G-60, signifying a zinc content of 0.6 ounces per square feet (183 grams per square meter).

While the minimum galvanized coating required by ASTM C847 is G-60, it is possible to use other materials to protect metal lath from corrosion, such as increasing the galvanization to G-90, where zinc content increases to 0.9 ounces per square feet (274 grams per square meter) in protective coating or pure zinc alloy (99 percent pure zinc).

Expanded Metal Lath Accessories

The lath accessories selected for a particular project depends largely on the regional climate of the construction site, along with the type of plaster/stucco or stone application used to form the façade. For instance, the high humidity and salty air of coastal environments often demands zinc alloy or PVC exterior skin components. In drier climates, however, galvanized accessories are acceptable. It should be noted that there may be trade-offs with certain materials.

For example, while zinc alloy offers greater corrosion resistance, the material is considerably softer than galvanized steel. And, while PVC accessories allow no oxidation, they may not fit the building owner&#;s aesthetic preferences.

Another important thing to remember is that grouping incompatible materials in the final specification of lath, fasteners and accessories can increase the possibility of galvanic corrosion (i.e. electrolysis) or inconsistent corrosion protection, which threatens the long-term stability of the building&#;s cladding.

Proper Installation Is Key

Proper lath installation is of equal importance to the stability of plaster-based building exteriors. Below are some of the most common lath-related installation errors and how they can be avoided:

Improper Plywood Sheathing Installation: According to the American Plywood Association, plywood sheathing should be installed with a minimal gap of 1/8-inch between sheets to accommodate any expansion that may occur in the wood as a result of moisture intrusion. It is important to note that in cases where large amounts of moisture enter the exterior wall assembly; the plywood may delaminate or swell significantly, ultimately causing the stucco cladding to deteriorate. The best protection against these liabilities is an effective moisture management strategy within the exterior wall assembly, consisting of high-performance insulation, air barriers and vapor retarders or barriers.

Improper Installation of Water-resistive Barriers: Chapter 25 of the IBC states that exterior wall assemblies shall include two independent layers equivalent to Grade D paper that serve as water-resistive barriers. The only exception is the use of 60-minute Grade paper and a non-water-absorbing layer drainage plane, or rainscreen.

Improper Metal Lath Installation: Some of the more severe metal lath installation errors involve improper lapping attachment to the framing members, improper installation of paper-backed metal lath, incorrect fastening of the adjoining sheets at the laps and the improper orientation of the lath sheets. A well-defined installation primer for metal laths (with or without paper backings) can be found in ASTM C, or the Expanded Metal Lath Association&#;s Guide Specifications for Metal Lathing and Furring (EMLA 920-09) and can guide the contractor toward a successful installation.

Improper Fastening of Metal Lath: Improper fastening of expanded metal lath is the most common installation error and is often a result of the lath being randomly stapled or nailed to the sheathing instead of the structural member. ASTM C requires lath fastening at minimal intervals of 7 inches on center. Lath accessories&#; flanges must directly touch the lath, with no weather barrier sandwiched in-between.

Improper Installation of, or an Inadequate Number of, Expansion & Control Joints: ASTM C defines control joints as one-piece joints used to provide crack control for stucco shrinkage, drying and thermal expansion. The same standard describes expansion joints as two-piece joints used to accommodate some degree of movement in the stucco membrane caused by movement in the building or its components. Fastening the expansion joint flanges to sheathing, or leaving the lath un-cut behind the joint, negates the lath&#;s effectiveness.

Just like all accessories, the expansion joints must be wire-tied to lath edges or, in some applications, attached to supports at spacing that ensures stability. On large, vertical surfaces, it is wise to make vertical joints continuous and cut horizontal joints to abut the verticals, with proper care taken to prevent the horizontal joints from impeding the vertical joints&#; movement.

Improper Installation of Flashing or Sealants: Poorly installed or omitted flashing in areas where water can enter the exterior wall assembly can easily cause the cladding, sheathing and wood framing members to deteriorate. Mold growth may also result from extended moisture exposure, causing indoor air quality problems inside the building. Though flashing is generally not the responsibility of the lath contractor, notifying the general contractor of any improperly installed flashing or areas where flashing was left uninstalled can save the project team some trouble in the long run.

Conclusion

 In order to provide customers with high-performance, long-lasting building exteriors and minimize liabilities, it is imperative for building and design professionals to keep themselves up-to-date on all applicable building codes and ASTM standards. Adherence to the guidelines covered above will produce healthier, more stable and sustainable buildings and reduce callbacks.   

FAQS about the types of metal lath used as a plaster base for building interior ceilings & walls and for supporting stucco exteriors.

This article series provides a photo guide to identifying and installing types of plaster support systems: metal lath, wire lath, etc. that are installed in buildings. We use building ceilings and walls as a photo and investigation guide to plaster and mortar lath systems.

In this article series we describe and discuss the identification and history of older interior building surface materials such plaster, plaster board, split wood lath, sawn lath, and expanded metal lath, Beaverboard, and Drywall - materials that were used to form the (usually) non-structural surface of building interior ceilings and walls.

Expanded Mesh Metal Lath for Plaster Walls & Ceilings

These questions and replies about types of metal lath used for plaster and stucco systems were posted originally

at PLASTER LATH, METAL - you will enjoy the added information given there.

[Click to enlarge any image]

In some mixes, yes

See details at PLASTER ASBESTOS CONTENT

Was asbestos used plaster compound in the s

Related links:
5 disadvantages of an electro-welded mesh
Standard vs. Vinyl-Coated Chain Link Fences Compared
What is the best base for a gabion wall?

If you are looking for more details, kindly visit metal lath sheet.

Question: which way up does the diamond lath go on walls?

How to install and apply plaster to expanded metal mesh (diamond mesh):

I have heard contradicting information about the direction of the lath.

When I drag my hand from top down should the direction of the lath be biting at my hand or should it bite at my hand when I drag my hand from bottom up.

I read in one of your articles that &#;expanded metal lath must be installed with the correct side pointed up or the plaster will slip off when troweled on&#;. To me this means that my hand should drag (bite) when pulled from top down

Do you align with my interpretation and if this is your answer is your answer documented anywhere? - M.H., Construction Administrator

Reply: How to Install Metal Lath for Plaster or Stucco Systems

I agree with your surmise about the proper lath direction, but I'll also do some research and add that detail to our article when I can cite an authoritative source.

I suspect, however, that this technical point may be over-stated in that the same diamond mesh lath is used on ceilings where the direction of the mesh won't make difference in the adhesion of the plaster.

In any case it's the plaster ears or mortar keys that are formed by plaster that is pushed through the lath that make the plaster or mortar mix adhere soundly to the metal lath.

That's also why metal lath that is nailed too tightly to a smooth surface with no air gap behind may not give great results.

See these

Metal Lath Installation Guides

• Amico, METAL LATH and ACCESSORIES, [PDF] Alabama Metal Industries Corporation Fayette Avenue, Birmingham, AL USA :(205) 787- (800) 366- Website: www.amico-lath.com
• Clark Dietrich, BEST PRACTICES for SELECTION & INSTALLATION of EXPANDED METAL LATH PRODUCTS [PDF], () ClarkDietrich&#; Building Systems, Centre Pointe Drive, Suite 400 West Chester, OH USA, :(513) 870- Website: https://www.clarkdietrich.com, : retrieved /01/12, original source: https://www.clarkdietrich.com/sites/default/files/imce/pdf/WhitePapers/_Jan_Lath/CD_WP_Expanded_Metal_Lath-Jan.pdf
• HOW to INSTALL METAL LATH [PDF], retrieved /01/12, original source: Home Depot Stores, https://images.homedepot-static.com/catalog/pdfImages/0a/0afff321--47da-96bc-768e2f52d66d.pdf
  Excerpt:
  
  These installation recommendations are intended to be instructional and accurate. This is first a guideline, providing a general overview and also equips the lather with specific installation details, based on ASTM C -08 Standard Specification for Installation of Metal Lath.
• Maylon, Gary J., EXPANDED METAL LATH INSTALLATION for the APPLICATION of PORTLAND CEMENT STUCCO [PDF] "The Seven Deadly Sins" Constructin Dimensions, December , retrieved /01/12, original source: awci.org/cd/pdfs/_c.pdf
  
  Editor&#;s Note: This article, the first of two parts, discusses four of the eight &#;deadly sins&#; involved in expanded metal lath installation for the application of portland cement stucco. The secondpart, which will cover &#;sins&#; five through eight, will be published in the January issue of Construction Dimensions.
  
  Excerpts:
  1. Improper plywood sheathing installation (not necessarily the responsibility of the lathing contractor).
  
  2. Improper selection of metal lath by weight and style for each span and application.
  
  3. Improper installation of metal lath.
  
  4. Improper fastening of lath.
  
  5. Improper use of metal lath accessories or the use of the wrong accessory material for certain applications and areas.
  
  6. Improper installation or inadequate number of expansion joints.
  
  7. Improper installation of flashing and sealants at all possible points of water entry (also not usually the direct responsibility of the lathing contractor).
  
  8. Improper installation of suspended ceilings.

Question:

(Mar 6, ) jake said:

In the first picture on PLASTER LATH, METAL I see some black metal wire studs. I have these in my condo. Do you know what the name of this type of stud is?

Reply:

Jake those are metal roof trusses

Question:

(Apr 6, ) Mike said:
Would anyone know the size of staples (Florida code) used to secure the lath. I know its every 7"on center.

...

Continue reading at PLASTER LATH, METAL or select a topic from the closely-related articles below, or see the complete ARTICLE INDEX.

Or see these

Recommended Articles

• PLASTER TYPES & METHODS in BUILDINGS
  • PLASTER COATING LAYERS
  • FIBERBOARD PLASTER BASE SYSTEMS
  • GYPSUM BOARD ROCK LATH SYSTEMS
  • METAL LATH PLASTER LATH SYSTEMS
  • MASONRY SURFACE PLASTER
  • PLASTER & GYPSUM BOARD HISTORY & RESEARCH
  • PLASTER REPAIR METHODS
  • WOOD LATH for PLASTER or STUCCO
• PLASTER ASBESTOS CONTENT
• PLASTER BULGES & PILLOWS
• PLASTER DUST EXPOSURE HEALTH HAZARDS
• PLASTER INGREDIENTS, MIX, PROPERTIES
• PLASTER LATH, METAL
• PLASTER, LOOSE FALL HAZARDS
• PLASTER REPAIR METHODS
• PLASTER TYPE IDENTIFICATION
• PLASTER VENEER Best Practices
• PLASTERBOARD / DRYWALL EXPANSION COEFFICIENTS
• STUCCO WALL METHODS & INSTALLATION

Suggested citation for this web page

PLASTER LATH, METAL FAQs at InspectApedia.com - online encyclopedia of building & environmental inspection, testing, diagnosis, repair, & problem prevention advice.

Or see this

INDEX to RELATED ARTICLES: ARTICLE INDEX to BUILDING INTERIORS

Or use the SEARCH BOX found below to Ask a Question or Search InspectApedia

Ask a Question or Search InspectApedia

Try the search box just below, or if you prefer, post a question or comment in the Comments box below and we will respond promptly.

Note: appearance of your Comment below may be delayed: if your comment contains an image, photograph, web link, or text that looks to the software as if it might be a web link, your posting will appear after it has been approved by a moderator. Apologies for the delay.

Only one image can be added per comment but you can post as many comments, and therefore images, as you like.
You will not receive a notification when a response to your question has been posted.
Please bookmark this page to make it easy for you to check back for our response.

IF above you see "Comment Form is loading comments..." then COMMENT BOX - countable.ca / bawkbox.com IS NOT WORKING.

In any case you are welcome to send an directly to us at InspectApedia.com at

We'll reply to you directly. Please help us help you by noting, in your , the URL of the InspectApedia page where you wanted to comment.

Citations & References

In addition to any citations in the article above, a full list is available on request.

If you want to learn more, please visit our website expanded metal lath sheet.

ADVERTISEMENT