How to install an LED Linear Inground Uplight?

Link to MDL

How to Install an LED Linear Inground UplightLED Linear Inground Uplight?

Installing an LED linear inground uplight can seem daunting at first, but with these step-by-step instructions, it can be a breeze.

1. Determine the Placement.

First and foremost, decide where you want to place your LED linear inground uplight. This will depend on several factors, such as the layout of your outdoor space and what kind of effect you want to achieve. Once you have determined the placement, mark the spot with a stake or marker.

2. Prepare the Installation Area.

Before you start digging, make sure you have all the necessary tools and equipment. You'll need a shovel, a trenching tool, and a conduit. You'll also need to check with local building codes and get any necessary permits before beginning. Once you're ready to start, clear the installation area of any debris and make sure the ground is level.

3. Dig a Trench.

Use a trenching tool to dig a trench from the installation area to the power source. The trench should be deep enough to accommodate the conduit and wide enough to provide room for the wires. Make sure the trench is straight and level to ensure that the conduit will lay properly.

4. Install the Conduit.

Lay the conduit in the trench and secure it in place with stakes or brackets. Make sure the conduit is level and straight. Once it's in place, run the wires through the conduit and connect them to the power source.

5. Install the Fixture.

Once the conduit and wires are in place, it's time to install the fixture. Carefully measure the dimensions of the fixture and mark the installation area. Use a shovel to dig a hole that matches the dimensions of the fixture and make sure it's deep enough to accommodate the fixture and the wires.

6. Connect the Wires.

Once the fixture is in place, connect the wires to the fixture according to the manufacturer's instructions. Make sure the connections are secure and there are no loose or exposed wires.

7. Cover the Fixture.

Once the fixture is connected, cover it with a lens or covering to protect it from the elements. Make sure the lens or covering is secure and won't come loose.

8. Test the Fixture.

Before filling in the hole, test the fixture to make sure it's working properly. Turn on the power source and make sure the fixture illuminates as expected. Adjust the fixture if necessary to achieve the desired effect.

9. Fill in the Hole.

Once the fixture has been tested, fill in the hole with soil or gravel. Make sure to pack it down firmly to prevent settling.

10. Enjoy Your New LED Linear Inground Uplight!

Now that your fixture is installed and working, sit back and enjoy the beautiful new addition to your outdoor space!

View Details