Flat, Shaped and Round Wire

Applications

Cold headed, cold upset or cold pressed parts, Fasteners such as nuts and bolts, Carburized parts such as gears, pins, dowels and machine parts, Various types of levers, Wire products

If you want to learn more, please visit our website.

Description

Low carbon steel is a type of metal that has an alloying element made up of a relatively low amount of carbon. Typically, it has a carbon content that ranges between 0.05% and 0.30% and a manganese content that falls between 0.40 and 1.5%. Low carbon steel is one of the most common types of steel used for general purposes, in part because it is often less expensive than other types of steel. This steel contains properties that work well in manufacturing a variety of goods.

Chemistry Typical

Uns# Carbon Magnanese Phosphorous Sulfur Iron

G 0.80 max 0.25-0.40 0.040 max 0.050 max balance G 0.10 max 0.15 max 0.030 max 0.035 max balance G 0.80-0.13 0.30-0.60 0.040 max 0.050 max balance G 0.14-0.20 0.60-0.90 0.040 max 0.050 max balance G 0.17-0.23 0.30-0.60 0.040 max 0.050 max balance

* Contact Ulbrich Wire for request regarding the availability of other aluminum alloys.

Physical Properties

Typical Density: 0.284 lbs/in3, 7.87 g/cm3

Electrical Resistivity (typical): (ohm-cm@ 32°F, cold drawn): 0. - 0.
Thermal Conductivity (typical): BTU-in/hr-ft2-°F: 360

Mean Coefficient of Thermal Expansion (typical): µin/in-°F:
68 - 212 °F: 6.5 - 7

Modulus of Elasticity: KSI
27 .5 - 30.5 x 103 in tension

Melting Temperature: - °F ( - °C)

Forms

Profile, Round, Flat, Square

Mechanical Properties at Room Temperature

Properties: Cold Drawn (Typical)

Ultimate Tensile Strength: 48 KSI min (330 MPa min)
Yield Strength: 41 KSI min (285 MPa min)
Elongation: 15% min

Properties: Tempered

These alloys can be cold worked to various tempers.

* Actual physical and mechanical properties are alloy dependent. Contact Ulbrich Technical Service for alloy specific properties.

Additional Properties

Wire Finishes

XC - Extra clean. Annealed or annealed and cold rolled.

* Contact Ulbrich Wire with special finish requests.

Heat Treatment

Most of these alloys are hardenable by cold working and heat treating.

* Contact Ulbrich Wire for additional information.

Welding

Contact Ulbrich Wire for specific information.

Limitation of Liability and Disclaimer of Warranty: In no event will Ulbrich Stainless Steels & Special Metals, Inc., be liable for any damages arising from the use of the information included in this document or that it is suitable for the 'applications' noted. We believe the information and data provided to be accurate to the best of our knowledge but, all data is considered typical values only. It is intended for reference and general information and not recommended for specification, design or engineering purposes. Ulbrich assumes no implied or express warranty in regard to the creation or accuracy of the data provided in this document.

Low-Carbon Steel Wire for Producing Nail, Mesh, Concrete Construction

LSW-01: Low carbon steel wire

Low carbon steel wire

Low-carbon steel wire is normal quality wire, and it is called general purpose wire. Steel wire is usually well holds its shape, but this is a heavy metal, and bend it easily. Often used for a variety of frameworks.

Specifications
The diameter: Low-carbon steel wire is manufactured with diameters from 0.20 to 8.0 mm by repeated cold drawing. The raw material for hot-rolled wire rod is with diameters 5.0-9.0 mm.
Coating: galvanized, copper.

• According to the type of processing steel wire is:
  • Heat-treated (annealed).
  • Thermally untreated.
• According to the type of surface:
  • No cover.
  • Coated (galvanized, copper coated).
  • Low-carbon steel wire heat-treated coatings without light, and in consultation with the manufacturer of the consumer is also allowed production of a black wire.

Features:

1. Bend it easily.
2. Mild steel galvanized wire has high resistance to corrosion.

Packing: The wire supplied in coils of 0.02-0.2 tons and in the pallet of 0.8-1.2 tons. Each coil tied.

LSW-02: Low carbon steel wire big coil

Low carbon steel wire big coil

LSW-03: Black low carbon steel wire
Composite Architectural Screening
Gabion Fence and Wall Ideas Designs

Black low carbon steel wire

LSW-04: Low carbon steel wire small coils

Low carbon steel wire small coils

LSW-05: Low carbon galvanized steel wire

Low carbon galvanized steel wire

LSW-06: Low carbon cut wire

Low carbon cut wire

Yaoan Wiremesh contains other products and information you need, so please check it out.

Related links:
How to Choose the Right Industrial Filtration System for ...
LSW-07: Low carbon spool wire

Low carbon spool wire

LSW-08: Low carbon steel wire in plastic bag package

Low carbon steel wire in plastic bag package

LSW-09: Low carbon steel wire coil

Low carbon steel wire coil

LSW-10: Low carbon steel wire warehouse

Low carbon steel wire warehouse

LSW-11: Low carbon steel wire in wooden pallet package for delivery

Low carbon steel wire in wooden pallet package for delivery

Application of Low-carbon wire:

1. In general, low-carbon steel wire is the widest range of application - from the production of nails, mesh and reinforced concrete structures, to use the wire as the final product.
2. Manufacture of nails - not bright annealed wire with a diameter of 1 to 6 mm.
3. As tie wire (binding wire) - heat-treated wire without coating or galvanized.
4. Low-carbon steel wire is also used in concrete construction for binding reinforcement.
5. Manufacture of welded wire mesh - bright wire or galvanized wire almost all diameters (0.5 mm - 6.0 mm).
6. Production of woven wire mesh - annealed uncoated or galvanized wire from 0.3 to 2 mm.
7. Production of other types of metal mesh - hexagonal twisted, jointed, grooved, etc.
8. The production of barbed wire - wire uncoated or galvanized with a diameter of 1.4 to 2.8 mm.
9. Agriculture - for growing hops, grapes - annealed and not annealed wire diameter 1.0 mm to 3.0 mm.
10. Air lines of communication - galvanized low carbon wire diameter from 2.0 mm to 4.0 mm.

We are always in the presence of a high quality low carbon steel wire. Price varies depending on the characteristics and the diameter of each individual wire. But for large volume orders we offer special rates. Low-carbon steel wire is sold by weight. Your desired order quantity is easily calculated, based on the diameter of a circle of wire and its total length.

Inquiry for Our Product

Shandong Xingying Environmental Energy Technology Co. LTD
:

When you contact us, please provide your detail requirements. That will help us give you a valid quotation.

Full Name

*

Address

*

Country Code

*

+ Number

*

Your Website

Message

*

The company is the world’s best Low Carbon Steel Wire Manufacturer supplier. We are your one-stop shop for all needs. Our staff are highly-specialized and will help you find the product you need.