How much does a plumber charge to replace a ball valve?

Nov. 04, 2024

Plumber cost to replace ball valve & other shutoff valves

Image Source: Angi

For more information, please visit our website.

Replacing a ball valve can be tricky and can fail if you are not careful. If an individual is considering hiring a plumber to install a new ball valve, they should first understand the pricing. The cost to replace the ball valve depends on how elaborate the job will be. You need to know the entire process of installing a new ball valve to budget for it. This guide will show you what kind of price range plumbers charge to replace ball valves and other shutting valves.

plumber cost to replace ball valve

If the ball valve needs to be replaced, it will cost at least $175-$250. This includes the cost of having a plumber come to your home for an estimate. If you have a simple leak, this will be your only expense. However, if there are other issues with your plumbing system, you may be charged more for the inspection. If you want to save money on repairs and maintenance costs, then you should consider hiring someone who offers these services at an affordable price.

Are ball valves repairable?

Ball valves are used in many different industries and applications. However, they do not last forever. It is possible to have a ball vale repair if you know what to look for and how to make the necessary adjustments.

How long does a ball valve last

The life of a ball valve depends on the type of materials it&#;s made of. If the ball valve is properly taken care of, it can last up to 8-10 years. It&#;s important to note that most valves have limited lifespans, so consult www.xhval.com to get an answer.

How much does it cost to replace a ball valve?

To determine how much it will cost to replace a ball valve, you must first know what type of valve needs replacing. The cost to replace a ball valve is typically between $200 and $500. This depends on the ball valve manufacturer, brand, model, and whether it is installed. This estimate includes labor costs, material costs, and other miscellaneous expenses. The price range can vary based on your location and whether you want to hire a professional or do the work yourself.

Are all water shut off valves the same?

All water shut-off valves are not the same. There are three water shut-off valves: the ball, the gate, and the globe. Ball valves and gate valves have a ball or gate that opens in one direction and closes in the other direction.

Globe valves have a spherical shape that opens in both directions. Water shut-off valves are essential for plumbing systems as they help control water flow into homes and businesses. Using these valves, you can control the amount of water flowing into your home or business.

How much does it cost to replace main water shut off valve

Costs to replace a check valve

The cost to replace a check valve varies widely depending on the type of check valve, location, and service type. On average, expect to pay between $100 and $400 for a professionally installed replacement check valve. On the other hand, the valve itself costs $35 to $600.

Costs to replace a gate valve

Replacing a gate valve requires removing the old one from its mount and installing a new one. Anyone can do the replacement process with basic plumbing skills and tools. It takes about an hour for most people to complete and costs from $375 to $600 on average.

Costs to replace a globe valve

The cost to replace a globe valve can vary greatly depending on the type of valve. On average, a homeowner can expect to spend between $150 and $300 for a typical replacement job. However, this cost may be higher if you need to hire an HVAC professional or live in an area where labor costs are high.

Costs to replace a gas shut-off valve

The cost of the valve itself will depend on its size and brand name. The average cost to replace a gas shut-off valve is around $250-$750. However, the price can be significantly higher if there&#;s damage to the pipes or the work requires an extra step due to an unusual installation location.

Costs to replace stop valve

The costs of replacing a stop valve will vary depending on the type of valve, the age of your home, and other factors. The price range is from $375 to $600, depending on the quality of the replacement. Some types are more challenging to repair than others because they require specialized tools or skills. Others may simply require removing some screws and putting things back together again.

Shut off valve replacement costs related factors

Several factors influence the cost of shut-off valve replacement. The first one is the type of valve you need. In addition, there are different types of shut-off valves available in the market. They are gate, ball, gate check, and globe valves. The type you need depends on the purpose you want to achieve through the replacement process.

Another factor that influences the cost of shutting off valve replacement is the material used to make it. You can find shut-off valves made from different materials depending on your preference and need. For example, stainless steel is a good option for you if you want something that will last long.

However, if you don&#;t mind spending extra money, then copper can also be a good choice as it has some excellent features that make it worth every penny. The last thing that affects shut-off valve replacement costs is where you want to install the new valve and how easy it will be to reach there. The average cost to replace a water shut-off valve is between $375 and $600.

Costs of shut-off valve replacement equal to the water shut off valve price if you replace it by yourself

Check valve price

A check valve is an automatic device that controls the flow of fluids through a pipe or tube. Check valve price is dependent on several factors, such as size and material. If you want an an automatic device that controls the flow of fluids through a pipe or tube, then you should try a check valve. It ranges between $135 and $1,000.

Gate valve price

Gate valve price is a crucial factor to consider when purchasing gate valves. It ranges between $100-$200. The gate valve is a small turn-key valve that can be used in many industrial applications.

Globe valve price

The price of globe valve also depends on how long they are expected to last. If you want to buy one that will last for several years, then you need to invest more money into a globe valve. Globe valve price can range from $10 up to $200.

Water shut off valves replacement

Here&#;s a step by step guide for gate valve replacement:

1. The local water department can be contacted to turn off the water while work is being done if the indoor shut off valve is not effectively stopping water flow. This valve is located close to the street.

2. Open the building&#;s faucets and showers while the water is turned off to let any remaining water in the pipes drain out.
3. Before cutting into the main water line, clean it with sandpaper.

4. Use a tubing cutter to make a cut into the water line. In the event that the line is broken, any remaining water may need to be drained.

5. To clean the interior of the valve, use the fitting brush.

6. Flux should be applied to the valve&#;s interior and the pipe&#;s exterior.

7. When the flux bubbles, hold the torch against the fitting and then touch the solder to the pipe on the other side of the flame. If the temperature is right, the solder should melt and fill in all of the spaces.

8. To reactivate the water supply, dial the water company.

How often should shut off valves be replaced?

Shut off valves are usually under a lot of pressure and are susceptible to wear and tear over time. It&#;s recommended that you replace them every 5 years or so depending on where you live and how often you use them.

Valve replacement costs: summary

Many inexpensive ball valves are made of cast, which is softer and less durable than forged brass. If you do need to hire a plumber, this will give you an idea of contractor pricing for the work. Note that costs can vary significantly by region, so always get at least three quotes and ideally more than three for comparison.

Plumbers invoice for new ball valve (how much, water ...

Page 1 of 3

23 >

08-16-, 09:57 AM mandK

Location: SoCal

347 posts, read 1,281,648 times

Reputation: 404

Advertisements

I called a plumbing company to replace a PRV on my water heater. It took him about 1/2 hour.

While he was there I asked him to replace the outside main shutoff (old gate valve) with a 3/4" ball valve. It took him about 10 minutes.

The charges: $98.00 for PRV
$180.00 for the ballvalve.

The charges seems kinda high for the ball valve. Was I ripped off?

thx
MandK

08-16-, 10:11 AM AksarbeN

Location: Looking over your shoulder

31,304 posts, read 32,869,458 times

Reputation:

{{{Ouch}}} You can buy a 1" inline ball-valve for under $60 at Grainger. The $180 amount seems a little too high, I would have thought $100 ~ $125 would be more in line. However I'm not a professional plumber, but I did have the main valve replace a few years ago with a ball type and that was the price back then.

08-16-, 10:37 AM harry chickpea

23,589 posts, read 70,358,767 times

Reputation:

You don't have your area of the country indicated. In the greater New York area, that would be fine. In north Alabama, he would have been overcharging. Since it appears that he has built-in labor and transportation charges, I'd say it was a little high but not enough to do much more than ask pricing before calling a plumber out on a call in the future.

08-16-, 10:46 AM mandK

Location: SoCal

347 posts, read 1,281,648 times

Reputation: 404

Link to YIYUAN

Quote:

harry chickpea

Originally Posted by

I would guess transporation charges bumped up the price. He drove up in a Chevy diesel work truck that was almost as tall as my house.

I had a feeling his rates were going to be high the second I saw the monster truck.

Live and learn

SoCalI would guess transporation charges bumped up the price. He drove up in a Chevy diesel work truck that was almost as tall as my house.I had a feeling his rates were going to be high the second I saw the monster truck.Live and learn

08-16-, 11:32 AM sj

Location: Mount Laurel

4,187 posts, read 11,923,904 times

Reputation:

The rate is a bit on the high side but I don't think you were ripped off. Should have have gotten a discount? Maybe but it's really up to the plumber. He is just charging what it would have been if he left and you call him out to change the valve.

Plumbers, electricians, trade professions don't like small jobs. Jobs that you may think it's only 10 minutes is charged by the hours or more.

08-16-, 11:49 AM Kayekaye

4,096 posts, read 6,212,304 times

Reputation:

People don't realize how much hourly charges have to be for one to make a profit. Making a profit is the only reason to be in business. Charging a minimum hourly rate is very normal for jobs that take less than an hour. Did you ask what his hourly rate was before hiring him?

While this was a very minor job, getting the job done in a half hour shows he really knew what he was doing.

08-16-, 12:09 PM sj

Location: Mount Laurel

4,187 posts, read 11,923,904 times

Reputation:

Quote:

Kayekaye

Originally Posted by

Agree and it's only minimal with the right tools. Depending on if the street shut off shut your water off completely, putting a new sweat valve on may not be that simple.

08-16-, 04:34 PM RayinAK

Location: Not far from Fairbanks, AK

20,292 posts, read 37,157,521 times

Reputation:

Most plumbing shops have an hourly charge that begins the soonest the plumber drives out of his shop to do the work at your house. The hourly charge seems about normal, but the one for parts should be a little lower. However, the joint solder, flux, sand paper, and gas is also added to the total cost for parts. So all depends on where the work was done. Where I live that's about the right price, so i do most of the work myself.

08-16-, 06:56 PM TrapperL

Location: Texas

5,717 posts, read 18,909,338 times

Reputation:

I'm sure I'll regret asking but why is there a PRV on just the H/W heater? We install them for the entire house on all new houses. Putting one on a water heater? Doesn't make sense to me. Here, I could have a new PRV installed and a whole house cutoff (we use 1" ball valves here) for about $100.00 including parts and labor. Since we install the PRV as a main line unit, it's installed just ahead of the ball valve meaning you can replace both real quick as a single unit. My plumber wouldn't have been there 15 minutes to replace both in our application.

08-16-, 07:03 PM MrWillys

Location: Cold Springs, NV

4,625 posts, read 12,287,540 times

Reputation:

Quote:

TrapperL

Originally Posted by

Trap, I think you've lost it. All water heaters come with a pressure relief valve????

Please register to post and access all features of our very popular forum. It is free and quick. Over $68,000 in prizes has already been given out to active posters on our forum. Additional giveaways are planned.

Detailed information about all U.S. cities, counties, and zip codes on our site: City-data.com.

Page 1 of 3

23 >

City-Data Forum Message
Quick Reply The following errors occurred with your submission

Message:

Posting Quick Reply - Please Wait
« Previous Thread | Next Thread »

Want more information on Customized Valve Ball Services? Feel free to contact us.