Dupont 2.54mm Pitch Connectors
Oct. 07, 2024
Dupont 2.54mm Pitch Connectors
SCT Series is Scondars Line of Reliable 2.54mm Pitch Wire-to-Wire Power Connectors Likened to the Dupont Brand
Scondar offers SCT Series as replacement and cheaper alternative of Dupont 2.54mm pitch wire-to-wire connector in a complete package including the male housing, female/receptacle housing, female terminal and male terminal, all manufactured with precision-fitting and durability ensuring accurate mating.
If you are looking for more details, kindly visit our website.
Dupont 2.54 mm Pitch connector is a low profile wire-to-wire connector delivering 3.0A current for AWG #22 to #28 suitable for either power transmission systems or chassis wiring.
Features
Well-Designed Crimping Feature
Scondar offers a crimp style lock and a configuration which prevents users from inverted insertion. It is well-engineered to be air-tight, preventing oxygen and moisture from reaching the metals, causing corrosion. Thus, the connector can be easily removed from the head without holding the wires
Flexible Terminal Strip and Board Stackers
Dupont 2.54 connector has a flexible terminal strip and board stackers for stacking.
Available With Shroud or Without Shroud
It is available as either with a shrouded or unshrouded header, with configurations for through-hole, SMT or mixed technology and press fit.
Safe and Fully-Sealed Electrical Interfaces
The electrical interfaces are fully sealed using a shrouded-header for use applications with high levels of moisture. The shroud helps meet the low smoke, toxicity and flammability requirements of almost all industries.
Equipped with Reduced Mating Force (RMF) Solutions
The different wire-to-wire connector types are equipped with RMF solutions for lower friction solution between the contacts of the device and the socket, making insertion and removal of the device easier, while at the same time eliminating the need for the complex mechanisms such as in ZIF sockets.
With competitive price and timely delivery, RHT sincerely hope to be your supplier and partner.
Application
- Rechargeable battery packs
- Battery balancers
- Battery eliminator circuits
- Radio controlled servos.
- RGB LED decorative light strips
- Seat wiring and actuation
- Passenger service units
- IFE (in-flight entertainment)
- Electronic window shutters
- Gallery
Material and Packaging of Dupont 2.54mm Pitch Wire-to-Wire Connector
Using a UV-Resistant Thermoplastic Material for Enhanced Connector Performance
The housing components are injection molded Nylon66,UL 94V-0. These thermoplastics are scientifically proven to resist UV-radiation than the normal plastics, ensuring that the connectors are well-protected, reducing the chances of early degradation and increased cycles/minute of the connector subjected to harsh environments.
Tape and Reel Packaging for SMT Components
Scondar uses a state-of-the-art tape and reel equipment to package a variety of components.
The tape and reel packaging strip has accurately sized cavities for the terminal height, width and depth, securing the them from the environment and maintaining consistent position during transportation.
You can expect that your wire-to-wire connector package is undisturbed during the trip and has maintained its vitality even during your production stages, which is why a lot of our customers has raved about our product for both cheaply-priced and, at the same time, resembles the Dupont 2.54mm pitch wire-to-wire product in performance and quality.
The complete package will include the following:
Female terminal: 10,000 pcs/reel, brass material and tin-plated finish
Male terminal: 10,000 pcs/reel, brass material and tin-plated finish
Female Housing (Nylon 66, UL94V-0 500): pcs/bag
Male Housing (Nylon 66, UL94V-0 500): pcs/bag
What is the real pitch of JST-XH?
Adding to this old topic since it comes up when you search on the subject.
Years ago I followed instructions that explicitly tell you to use 2.5mm pitch when interfacing with their products onboard 9-pin JST-XH header. It even stresses that 2.54mm is incorrect:
JST Connector is type JST XH 9 position 2.5mm. Note that 2.5mm is not the same as 2.54mm. This was for an advanced installation and I only needed one connection, so I just soldered a wire with in-line DuPont connections.
The next time I was asked to do an advanced install I found that the JST-XH assortment I bought for my 3D printers was all 2.54mm without any that were 9-pin. Since I didnt need to populate every position I made it work by cutting and gluing two connectors. This worked well presumably because I only populated the few pins I needed and the cumulative deviation was reset by my cut. Still, I wanted to be more professional without a hacked together connector for my next install.
After that experience I slogged through listings and the only reasonable options were either a bunch of pre-made wire harnesses on eBay or a particular assortment from Amazon. Sure enough, almost everything else on Amazon specified 2.54mm but I finally found one with only 2.5mm in the product name and ordered it. Unfortunately, the product details specified 2.54mm and the assortment matched the later description. I was able to get a refund due to this contradiction.
So here I am, preparing to do this for someone yet again and I STILL dont have 9-position JST-XH 2.5mm connectors and not for lack of trying. I totally understand the OPs frustration with finding that even connectors with JSTs markings did not conform to spec and were actually 2.54mm. True 9-position 2.5mm JST-XH seems to be unobtainium even though its the spec and thats the point where they get long enough for that to matter!
For more 2.54mm Pitch Idc Socket Connectorinformation, please contact us. We will provide professional answers.
26
0
0
Comments
All Comments (0)